Lathe
Lathe
GMT - Heavy Duty All Geared
Heavy Duty All Geared Lathe Machines
“GMT Lathe” offers wide range of lathe machines in various sizes, specifications and features depending on the Customer’s requirement.
Our GMT Brand Heavy Duty All Geared Head Lathe Machines is Specially Designed for the high RPM upto 1060 / 9 Speed and also the Main drive of headstock is driven by gears which gives. Bed is completely Induction Hardened, all revolving parts are Balanced properly for maximum output of machine.
Our All Geared Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineering maintenance workshop.
- Accessories
- Technical Specification
STANDARD ACCESSORIES
| Chuck Plate |
| Center Adopter |
| Dead Center-2 |
| Thread Dial Indicator |
| Square Tool Post |
| Change Gear Set |
| Motor Stand |
| Motor Pulley |
| Chip Collector Tray. |
EXTRA ACCESSORIES
| True Chuck, Dog Chuck |
| Electric Motor |
| Face Plate |
| Steady Rest |
| Follow Rest |
| Rear Tool Post |
| Rear Splash Guard |
| Quick Change Tool Post |
| Coolant Pump Fitting with Coolant Tank |
| Taper Turing Attachment |
| Machine Lamp. |
| Electric Panel / Third Shaft |
| Power Brake |
| Motorised Appron |
| SPECIFICATION | 12" | 15" |
|---|---|---|
| SPECIFICATION | ||
| Type of bed | INDUCTION HARDENED | INDUCTION HARDENED |
| Bed Width | 325 mm | 375 mm |
| Height of Center Over Flat Bed Ways | 304 mm | 375 mm |
| Maximum Swing over bed | 590 mm | 730 mm |
| Maximum Swing over Cross Slide | 390 mm | 530 mm |
| Maximum Swing in Gap | 900 mm | 1060 mm |
| Type of Spindle | A2-8 /Threaded | A2-8 /Threaded |
| Spindle Speed | 30 to 1060 RPM | 30 to 1060 RPM |
| Diameter of Hole Through Spindle (option in bore size availaible. ) | 80/104 MM | 80/104 MM |
| Inch Range | 2 to 24 T.P.I. | 2 to 24 T.P.I. |
| Metric Range | 1 to 6 mm | 1 to 6 mm |
| Lead Srew Dia. & Pitch | 38 mm 4 T.P.I. | 38 mm 4 T.P.I. |
| Tail Stock Spindle Dia. | 57mm (2 1/4") | 57mm (2 1/4") |
| Tail Stock Spindle Taper Bore | MT-4 | MT-4 |
| Tail Stock Spindle Travel | 160 mm | 160 mm |
| Power Required | 2.2 kw / 3 H.P. | 2.2 kw / 5 H.P. |