Lathe
Lathe
TURNER light Duty Under Counter Lathe
Light Duty Under Counter Lathe Machine
Bed is made form 25 Grade Cast Iron of 180 BHN hardness, strictly checked with Microlevel, Hardness Tester and Straightedge.
Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground spindle made from alloy steel.
Fitted with induction hardened and ground spindle made from alloy steel.
Apron is totally enclosed in oil bath system with lever type arrangement for automatic feeds.
Hexagonal shaped Tail Stock with hardened and ground tail stock spindle made from alloy steel having external and internal grinding.
Instruction Manual as per Indian Standard IS – 1878 (Part – 1) 1993.
- Accessories
- Technical Specification
STANDARD ACCESSORIES
| Change Gear set (Inch & mm) |
| Chuck Plate |
| Tool Post Key |
| Centre Adaptor |
| Dead Centre (2 Nos.) |
| Drive V-Belt |
| Motor Pulley |
| Four Position Tool Post |
EXTRA ACCESSORIES
| Dog or True Chuck |
| Electric Motor & V – Belt with Electrical |
| Coolant Pump, Tank & Nozzle |
| Quick Change Tool Post with tool holders |
| Rear Tool Post with long cross slide |
| Taper Turning Attachment |
| Reverse – Forward Switch |
| Steady Rest |
| Follow Rest |
| Face Plate |
SPECIAL REQUIRMENT
| Notron Gear Box (Single Screw) |
COLOUR OPTIONS
| Blue & White (Two Tone) |
| Bayer Blue & Silver Grey (Two Tone) |
| SPECIFICATION | LD UND-1 | LD UND-2 | LD UND-3 |
|---|---|---|---|
| BED | |||
| Bed Type | 2 V & 2 Flat | 2 V & 2 Flat | 2 V & 2 Flat |
| Bed Length | 1375 (4'6") | 1600(5'-3") | 1825(6') |
| Bed Width | 240 mm (9.½”) | 240 mm (9.½”) | 240 mm (9.½”) |
| Gap Length | 120 mm | 120 mm | 120 mm |
| Capacity: | |||
| Height of Centre | 180(7") | 180(7") | 180(7") |
| Swing over Bed | 355mm | 355mm | 355mm |
| Swing over Gap | 520mm | 520mm | 520mm |
| Swing over Cross Slide | 210 mm | 210 mm | 210 mm |
| Admit Between Centre | 675 mm | 675 mm | 675 mm |
| Movement of Cross Slide | 150mm | 150mm | 150mm |
| Movement of Compound Slide | 115mm | 115mm | 115mm |
| Main Spindle: | |||
| Spindle Nose (Threaded Type) | Ø 61.850 mm | Ø 61.850 mm | Ø 61.850 mm |
| Taper Bore in Spindle Sleeve | MT-3 | MT-3 | MT-3 |
| Spindle Bore | Ø 40 mm | Ø 40 mm | Ø 40 mm |
| Tail Stock: | |||
| Quill Dia | Ø 38.1 mm | Ø 38.1 mm | Ø 38.1 mm |
| Taper in Quill | MT-3 | MT-3 | MT-3 |
| Quill Travel | 120 mm | 120 mm | 120 mm |
| Speed: | |||
| No. of Spindle Speed | 8 | 8 | 8 |
| RPM (Low/High) | 40 – 1000 | 40 – 1000 | 40 – 1000 |
| Threads: | |||
| Metric Thread | 13 (1 to 6 mm) | 13 (1 to 6 mm) | 13 (1 to 6 mm) |
| English Thread | 19 (2 to 24 TPI) | 19 (2 to 24 TPI) | 19 (2 to 24 TPI) |
| Lead Screw | 01" x 4TPI | 01" x 4TPI | 01" x 4TPI |
| Electricals: | |||
| Motor Power | 1.5 H.P. / 1.12 KW | 1.5 H.P. / 1.12 KW | 1.5 H.P. / 1.12 KW |
| Drive: | |||
| V Belt | B-60 | B-60 | B-60 |
| General: | |||
| Weight (Approx.) | 575Kg | 650Kg | 700Kg |
| Floor Space Occupied in (mm) | 1850 x 640 | 2100 x 640 | 2350 x 640 |
| (Approx.)L x W x H | x 1100 | x 1100 | x 1100 |