Lathe

TURBO - ECO – 165 All Geared Head Lathe Machine

ECO – 165 All Geared Head Lathe Machine

Enquiry

Norton Gear Box (Single Screw)

Chuck Plate

Tool Post Key

Centre Adaptor

Dead Centre (2 Nos.)

Motor Pulley

Four Position Tool Post

Specification	165 / 1	165 / 2	165 / 3
Bed:
Bed Type	2 V & 2 Flat	2 V & 2 Flat	2 V & 2 Flat
Bed Length	1375 (4' 6")	1600 (5'-3")	1825 (6')
Bed Width	240 mm (9.½")	240 mm (9.½")	240 mm (9.½")
Gap Length	110 mm	110 mm	110 mm
Capacity:
Height Of Centre	165 (6.½")	165 (6.½")	165 (6.½")
Swing over Bed	320 mm	320 mm	320 mm
Swing over Gap	510 mm	510 mm	510 mm
Swing over Cross Slide	180 mm	180 mm	180 mm
Admit Between Centre	700 mm	930 mm	1160 mm
Movement of Cross Slid	200 mm	200 mm	200 mm
Movement of Compound Slide	115 mm	115 mm	115 mm
Main Spindle:
Spindle Nose (Threaded Type)	Ø 62 mm	Ø 62 mm	Ø 62 mm
Taper Bore in Spindle Sleeve	MT-3	MT-3	MT-3
Spindle Bore	Ø 40 mm	Ø 40 mm	Ø 40 mm
Tail Stock:
Quill Dia	Ø 38.1 mm	Ø 38.1 mm	Ø 38.1 mm
Taper in Quill	MT-3	MT-3	MT-3
Quill Travel	120 mm	120 mm	120 mm
Speed:
No. of Spindle Speed	8	8	8
RPM (Low/High)	76 – 725	76 – 725	76 – 725
Feeds:
Nos. of feeds Range	56	56	56
Longitudinal / Rev.	0.057 to 1.012 mm	0.057 to 1.012 mm	0.057 to 1.012 mm
Transverse / Rev.	0.010 to 0.184 mm	0.010 to 0.184 mm	0.010 to 0.184 mm
Thread / No. of Range
Metric Thread	20 (0.5 to 7.5 mm)	20 (0.5 to 7.5 mm)	20 (0.5 to 7.5 mm)
English Thread	36 (4 to 60 TPI)	36 (4 to 60 TPI)	36 (4 to 60 TPI)
Lead Screw	Ø 1" x 4 TPI	Ø 1" x 4 TPI	Ø 1" x 4 TPI
Electricals:
Motor Power	1 H.P.	1 H.P.	1 H.P.
Drive:

V Belt	B-42	B-42	B-42
General:
Weight (Approx.)	475 Kgs	5501Kg	625 kgs.
Floor Space Occupied in (mm)	1600 x 700 x 137	1900 x 700 x 1370	2125 x 700 x 1370
(Approx.)L x W x H	x 1370	x 1370	x 1370