Drilling
Drilling
MAAN - 40mm All Geared Radial Drilling
MAAN - 40mm All Geared Radial Drilling
Key Features
Main Spindle is made of "EN8" material
MT-bore internally grinded
Accuracy and run out of 0.01 to 0.04 in main spindle shaft
Pinion Shaft is made of "EN8" material
Provided 4-8 speeds by accurate balancing
Spindle sleeve-grinded
Work light [As per requirement]
Full size work table with accurate right-angled. [390X300] [Surface Grinding is available as per your required]
Tapper Roller facility for better sliding of drill head an arm guide
Coolant system [As per requirement]
Speeds can easily change
Nitride Hardened "Ram"
All gears are made of alloy steel [Gear Material]
Heat treatment [45 to 55 HRC] hardened & Lapped running in oil bath fitted
Ram is accurately grinded and Honing process is done in the bore body containing "Ram"
All the gears assemble in the machine are perfectly sized according to requirement [Precision gears]
All Bearing [NSK [Japan]/NBC/FLT Bearing]
All electricals parts are good quality [Company: L&T]
Column Design is heavy thickness and grinded as per the sizes required [Column size: 170mm]
Specially spring type balanced spindle travel
Manual And Fine feed system options
Note : All the above designs,dimensions and details are approximate only and we reserve the right to alter them without prior notice as we are improving the design.
- Accessories
- Technical Specification
Standard Accessories:
| Electrical consisting of two motors |
| R/F Switch |
| Wiring Etc. |
| Elevator Pulley |
Optional Accessories: (At Extra Price)
| Box Table |
| Coolant Pump with Fitting |
| Machine Lamp |
| Extra Column Height |
| Drill Chuck with key & arbor |
| Drill Sleeve |
| Drill Vice |
| Special T-Bolts |
| Foundation Bolt |
| Service Tool |
| Wooden Box Packing & Forwarding |
| Sr No. | Model No. | MAAN 40/950 |
|---|---|---|
| A | Capacity | 40 mm. |
| B | Drilling Capacity | |
| In Cast Iron Having 180bhn | 42mm. | |
| In Mild Steel Having 500mpa Tensile Strength | 40mm. | |
| C | Tapping Capacity | 25mm |
| D | Drilling in Head | |
| Taper in Spindle – (morse Tapper) | MT – 4 | |
| Spindle Travels – Auto/manaual | 250mm. | |
| No. of Spindle Speeds/Range | 8/50 – 1750 RPM | |
| No. of Auto Feeds | Manaual (Fine Feed) | |
| E | Electrical | |
| Power Supply | 415v,3ph,50hz | |
| Drilling Head Motor | 2hp | |
| Arm Elevating Motor | 0.5hp | |
| F | Working Range | |
| Drilling Radius Min/Max. | 480 / 1050mm. | |
| Distance Between Base Plates To Spindle Min/Max.[Spindle Retracted] | 250/950 mm. | |
| Drilling Head Traverse Max(Manual) | 565mm | |
| Vertical Traverse Of Arm [auto] | 750mm | |
| Column Sleeve Diameter | 170mm | |
| Rotation of Arm (Both Side) | 0-180DEG. | |
| G | Base Plate | |
| Working surface (L x W) | 850×650 mm. | |
| No. of T-Slots & Nominal Size | 4/21 | |
| Weight Of Machine with electricals & standard accessories[approx] Net / Cross | 850 / 1000Kg | |
| V-Belt Section Of Arm Elevator Motor | A-25 / A-24 | |
| H | Box Table Size[L X W X H] mm | 400 X 300 X 300 |
| Wooden Packing Dimension [L X W X H] | 1425 X 850 X 2100 |